GPC Decision No.(22) for 2006 approving prices for executing housing schemes

According to rules of this decision, prices for executing housing schemes are approved - should not exceed 295 L.D per Sq. M. as per specifications in table No.(1) attached in addition to allowance for zones and floors as per table No.(2,3) attached.

Infra structure public authority, real estate development, subordinate authorities, bank for saving and real estate investment and other public corporations to contract by direct authorization for execution of schemes for approved housing program according prices, specifications and allowances mentioned in article No.(1) of this decision.

Authorized parties for execution of approved housing program schemes may contract for execution of different housing schemes, administration buildings and other utilities with prices which differ from prices in article (1) of this decision on need for execution of works with specifications which differ from specifications of items of work in table No.(1) attached by any method of means of contracting stated in administration contract regulations referred to.

Price directory of item of work is approved for execution of buildings and its external utilities for 2006 prepared by national consultation office for use in estimation of budget , prices of schemes and evaluation of offers.

High committee which follows loans should check and evaluate building prices and specification of item works in article No.(1) of this decision annually or when required.

Tables attached with GPC decision No.(22) for 2006 approving prices for execution of schemes of approved housing program

Main items of work		Technical specifications of items	Unit
First: aggradations, digging, filling works for ground works	1	Location aggradations 25cm including digging, filling according technical specifications	M 2
	2	Digging work for ground works in any kind of earth with required depth	M 3
	3	Filling with earth obtained from digging, aggradations according technical specification	M 3
	4	Filling with earth from outside, aggradations according technical specification	M 3
	5	Transport of residues	M 2

Second: ground bases (bases, poles, beams)	1	Supply and mixing normal concrete consisting of 0.8 m 3 small stones (pebbles)+1.0 m 3 sand +250 Kg cement with thickness 15 cm under ground bases	M 2
	2	Supply and casting of reinforced concrete consisting of 0.8 m 3 pebbles (small stones)+ 0.40 m 3 sand + 350 Kg cement for each m 3 for ground works for poles.	M 3
	3	Supply and painting hot bitumen two layers for bases, walls, poles -rate including roof cleaning by coil brush	M 2
	4	Stone filling under the building ground from line stone of thickness 15 cm	M 2
	5	Concrete grounds of building with thickness 10 cm of normal concrete as concrete for bases bottom	M 2

Third: reinforced concrete for poles	1	Supply and casting of reinforced concrete from mixture as bases concrete according drawings and specifications	M 3
	2	Supply and casting of reinforced concrete for walls from mixture of bases concrete	M 3

Fourth: reinforced concrete for roofs and beans	1	Supply and casting reinforced concrete for stairs of mixture of bases concrete	M 3
	2	Supply and casting concrete roofs from concrete as bases concrete and use of bricks 25 cm without allowance for beans and some tiles	M 2

Fifth: building works + tie beams and beans for doors and windows	1	Supply and building of cement bricks with thickness 10,15,20,25 cm with mortar consisting of 250 Kg cement for 1 m 3 of sand and from cement bricks according maps	M 3
	2	Supply and casting reinforced concrete for beans from mixture the same as bases concrete	M 3
	3	To supply and casting reinforced concrete from mixture same as base concrete	M 3
	4	To supply and erect buildings of stone blocks with mortar same as mixture of cement block	M 3

Sixth: interior plastering		Remarks: general spray plastering to be made for all roofs to be plastered by mortar which consist of 450 Kg cement with 1 m 3 sand according technical specifications and installation of metal nets between buildings and concrete
	1	To supply and make hard plaster for walls and internal roofs with mortar which consist of 300 Kg cement + 2/3 m 3 sand	M 2

Seventh: sanitary works including insulating layer	1	To supply and make insulating layer for roofs for humidity from heated asphalt and kwalina of thickness 1.5 cm including gap of height not less than 25 cm without allowance for bathrooms, kitchens and roof of building	M 2
	2	To supply and install colored china washing basin and base not less than 48×45 cm for each flat and include water mix, copper plated siphon, chrome plated valve diameter ½ inch, plastic connection diameter 35/43, length about 80 cm and all requirements according specifications and drawings	Number
	3	Same previous item with dimensions not less than 35×50 cm and without base for each flat	Number
	4	To supply and install colored pottery double washing basin for each flat and complete filter size 45×120 cm, water mix, two siphons 2 water valves (hot, cold) diameter ½ inch from copper and chrome plated- connection PVC 50/60 length 80 cm according specifications and drawings	Number
	5	To supply and install 2 complete colored china toilet sets, valve diameter ½ inch- copper plated plastic connection 110/114 length about 1 meter and all requirements according specifications and drawings for each flat	Number
	6	To supply and install "washing basin" pottery plated with china colored for each flat with water mix, siphon, valve ½ all in copper plated chrome, plastic connection 1.5 inch length about 80 cm and all requirements according drawings and specifications	Number
	7	To supply and install 2 complete washers for each flat- copper valve chrome plated with all requirements according drawings	Number
	8	To supply and install bath basin china plated according required color 170×70 cm for each flat with thickness 10 cm around the basin siphon and mix with shower and valve diameter 0.500 m and pottery soap holder 15×20 cm, plastic connection diameter 2 inches and all requirements according specifications and drawings	Number
	9	To supply and install 2 chrome steel holders for each flat according specifications and technical conditions	Number
	10	To supply and install kitchen marble 120×45×3cm for each flat with all requirements according specifications	Number
	11	To supply and install 5 plastic ground siphons diameter 5 inches for each flat including plastic connection 50/60 mm, length 80 cm with all requirements according technical specifications and drawings	Number
	12	To supply and install electric water heater 80 liters capacity for each flat, inclusive of 2 valves 0.500 and electric connection according drawings and specifications	Number
	13	Same as item 12, but capacity 50 liters	Number
	14	To supply and install plastic tubes 35/43 mm including all welding, packing, concrete required according specifications, drawings and technical conditions	L. m
	15	Same as item 14 but pipes diameter 50/60	L. m
	16	To supply and install water pipes ¾ inches of P.P.R including all connection pieces and requirements according drawings and technical specification for cold water	L. m
	17	Same as previous item but pipes with diameter ¾ for hot water	L. m
	18	To supply and install steel water pipes diameter 1 inch grade (b) will all connections and fixing on wall, painting with 2 layers primer and final layer with required color, for the purpose of connection of main tank to each flat	L. m
	19	To supply and install pipes as in previous item for water but with diameter 2 inches to supply upper tanks of the building	L. m
	20	To supply and install 3 valves of P.P.R diameter ¾ inches for each flat with all requirements according technical specifications and drawings	Number
	21	Same as previous item but 2 valves bronze, diameter 1 inch for the building	Number
	22	Same as previous item but bronze valve diameter 2 inches with 5 for the building	Number
	23	To supply and install plastic pipes pressure 10 bar diameter 3 inches on the wall with all requirements, fixing on wall, paints with required color according drawing and specifications	L. m
	24	Same as previous item but pipes diameter 4 inches on wall for sewage	L. m
	25	Same as previous item but pipes diameter 4×0.25 for rain water outfall	L. m
	26	To supply and install ventilator for each sewage outfall pipe
		a) Diameter 3 inches	Number
		b) Diameter 4 inches	Number
	27	To supply and install system (Gregory) diameter 4 for rain water outfall, charges include paints, mortar and all requirements according drawings and specifications 5 for each building	Number
	28	To supply and install (galtrab) from pottery with steel cover including digging, filling, concrete, cement, plastering and all requirements according specifications and drawings- 8 for each building and the ground floor separately	Number
	29	To supply and install plastic pipes diameter 6 inches under ground including digging, filling concrete, covering pipes and all requirements according drawings	L. m
	30	Same as previous item but pipes diameter 8 inches	L. m
	31	To supply and install case for meters from sheets thickness 16/1 for the building which consist of 8 flats including supplying and installing 8 meters 0.75 complete with valves and requirements of same diameter as well as main valve, connections and all requirements according specifications and drawings	Number
	32	To supply and install manhole with internal diameter 60×60 cm roof, ground and walls from normal concrete and cement plastering, excavation, filling and cover of cast iron weighing 60 Kg and all requirements according specifications and drawings 4 for the building	Number
	33	Same as previous item but manhole 80×80 cm and depth 1.50 m- 3 for the building	Number
	34	To supply and install sunk pump capacity 3 Hp for lifting water to upper tank including connection with pipes, price including connection of operating keys, meters, float for keeping water level in the ground tank as well as all requirements according specifications and drawings	Number
	35	To supply and install connections of ground concrete tanks which consist of:- • Entrance galvanized pipe diameter 2 with paints • Exit galvanized pipe diameter 2 with paints • Valve diameter 2 inches • Normal float to be installed at the end of the supply line • Electric float to keep water level for the pump • Ventilators diameter 1.5 • Opening for cleaning with galvanized painted pipes diameter 1.5 • 1 galvanized sheet cover with all connections, work, mortar according specifications and drawings	Lump sum
	36	To supply and install connections of upper concrete tanks which consist of:- • 2 valves 2 inches • 1 valve 1.5 inch • 1 electric float • Ventilation pipe • 5 double cast iron • 1 aluminum cover for the tank • 1 ladder for use on building roof to tank • 1 cleaning pipe • With connection of electric circuit for the float and all requirements according technical specifications	Lump sum
	37	To supply and install water mixer for washing machine diameter 0.5 including connection pieces according technical specifications for each flat	Number
	38	To supply and install PVC pipes diameter 2 inches pressure 10 bar for rain water outfall in balconies fixing pipes on wall, painting and all requirements according technical specifications	Number
	39	Construction of dam in building ground with internal measurement 2×3×6 according maps including digging, filling, plastering, ceramic for the tank and cover from galvanized sheets, lean concrete under reinforced concrete of tank floor and construction of room 1.0×1.0×1.0 for the sunk pump and opening for feeding pipes and all requirements according technical specifications, drawing and engineer's instructions	Lump sum
	40	Same as previous item but upper tank and dimensions according maps	Lump sum
	41	To construct analysis tank for each building (5×10×3) work includes digging in any kind of earth, filling back, transport of residues outside location, concrete for base, beans, poles, roofs and cover from cast iron weighing 125 Kg

Eighth: electrical works	1	To supply and install light circuit for one outlet and one distribution key including connections with copper wires resistant by PVC inside the wall in the PVC and connection boxes according drawing	Number
	2	Same as previous item but for one outlet and 2 distribution key	Number
	3	Same as item 1 but lighting for two exits and key	Number
	4	To supply and install 15 amp outlet complete with connections as stated in item 1	Number
	5	To supply and install 15 amp outlet complete with connections as stated in item 1 including ground pole	Number
	6	To supply and install 20 amp outlet including ground pole	Number
	7	To supply and install normal bell circuit on flat's external door and connections according specifications and drawing	Number
	8	To supply and install TV outlet including wire of coax 0.75 inside pipes 16 mm and all connections according specifications and drawing	Number
	9	To supply and install lighting unit and 60 watt lamp	Number
	10	To supply and install telephone outlet	Number
	11	To supply and install complete lighting unit with lamp 100 watt for the roofs	Number
	12	To supply and install lighting unit on the wall diameter 15 cm and lamp 60 watt with cover for bath rooms and flat entrance	Number
	13	To supply and install distribution board inside the flat with one key-63 amp and 3 keys capacity 10 amp, and 5 keys capacity 16 amp, and 2 keys capacity 20 amp with complete connections	Number
	14	To supply and install main distribution board for the building for 8 flats and to be locked with dual lock and automatic key 250 amp, 8 keys 63 amp, 1 key 40 amp equipped with heat and magnetic protection with instrument for measuring current and voltage with all requirements and connections according specifications and drawing	Number
	15	To supply and install automatic lighting circuit for ladder consisting of 8 flats including required keys and connections according item No.1	Number
	16	To supply and install complete internal telephone systems (interphone) for the building from entrance and each flat, main speaking unit to be fixed in the wall and to be resistant to weather and it include wires and all requirements according specifications	Number
	17	To supply and install general earth for the building	Number
	18	To supply and install telephone complete for 20 lines	Number
	19	To supply and install distribution board for different parts as follows:- • Main key (dual) capacity 40 amp - No.1 • Subsidiary key (unilateral) capacity 16 amp - No.4 • Subsidiary key (dual) capacity 25 amp - No.1 • Subsidiary key (unilateral) capacity 10 amp - No.2 Complete with connections and main board of the building	Number

Ninth: carpentry works	1	To supply and install internal door Swedish timber, with paints and requirements according drawings	M 2
	2	To supply and install door or windows with white aluminum and glass and plastic mat with all requirements according technical specifications, drawings and engineer's instructions	M 2
	3	To supply and install door for toilets with Swedish wood, with parts and requirements according drawings	M 2
	4	To supply and install door for flat entrance from timber with paints and requirements according drawings	M 2

-	1	To supply and install steel door thickness 2mm on steel angle 25mm with paints according specifications for roof as per drawings	M 2
Tenth: steel works	2	To supply and install white aluminum windows with glass including all requirements according specifications and weight of aluminum should not be less than 6Kg/m according drawings	M 2
	3	To supply and install white aluminum doors with glass including all requirements according specifications and weight of aluminum should not be less than 8Kg/m according drawings	M 2
	4	To supply and install steel pipes 1.50 inches including painting and all requirements according technical specifications	L. m

Eleventh: tiles works	1	To supplying and casting cement mixture of cement and sand ration 1:1 to produce light mixture of 720Kg/m 3 to fill low grounds in the floors	M 2
	2	To supplying and casting concrete consisting of 0.8 small stones + 0.4 sand + 250Kg cement for leaning in the roofs for rain water flow with average thickness 7cm	M 2
	3	To supply and fix tiles for the roofs 25×25×25cm to be fixed with cement mortar thickness 2cm and to make separations 1.50cm wide and to be filled with expandable and water resistant substance	M 2
	4	To supply and fix tiles of broken marmar 30×30×3cm to be fixed with cement mortar thickness 2cm	M 2
	5	To supply and fix colored ceramic tiles for floors from approved sample for bathrooms	M 2
	6	To supply and fix white marmar thickness 1cm and height 10cm and to be fixed with cement mortar and sand	M 2
	7	To supply and fix white marmar beans selection No.1- thickness 3cm	M 2
	8	To supply and fix white marmar for windows -thickness 2cm	M 2
	9	To supply and fix concrete works 15×25cm around the building to be fixed on concrete layer thickness 10cm, including charges for digging, filling and works and all requirements	L. m
	10	To supply and fix colored cement bricks around the building 1.5m wide thickness 7cm on layer thickness 10cm according specifications and engineer instructions	M 2

Twelfth: wall plastering works	1	To supply and fix tiles from 2 colors for walls with wall height including all works and to be fixed with cement mortar	M 2

Thirteenth: mortar, ladder parapet works	1	To supply and fix white marmar thickness 2cm and height 16cm for ladders and to be fixed as stated previously	L. m
	2	To supply and fix studding for ladders with white marmar thickness 3cm, to be fixed with cement mortar and to plaster the apparent part	L. m
	3	To supply and fix studding for ladders with colored marmar thickness 2cm, to be fixed with cement mortar, same as previous item and to plaster the apparent part	L. m
	4	To supply and fix white marmar, thickness 3cm and to be fixed with cement mortar as previously stated	M 2
	5	To supply and fix parapet for ladders from steel profiles according drawings height 90cm and aluminum cover including paints, 2 layers anti dust and final layer according required color	L. m
	6	Same as previous item but height 70cm for balconies	L. m

Fourteenth: internal paints works	1	Supplying and painting plastic paint with 3 layers, requirements according technical specifications	M 2
Fourteenth: internal paints works	2	Supplying and painting three layers with oil paint, required color of halls internal walls with paste and all requirements according technical specifications	M 2

Fifteenth: external plastering	1	Supplying and plastering hard plaster by mortar same as internal plastering mixture and installing metal nets between blocks and concrete as plaster for graphite mortar	M 2
Fifteenth: external plastering	2	To supply and plaster with graphite mortar according required color and approved quality	M 2

Location	Zone	Zone allowance
Northern zone	Tripoli- Tajora- Janzoor- Alswani- Ben ghashir- Sidi Saih- Sok Alkhamis	2.2
	Alkhoms- Algarabuli- Zeliten- Misalata- Majer- Ghnima- Gaser Alakhiar- Alaamra	2.3
	Musrata- Tawergha- Aldafnia- Tomina- Gaser Ahmed- Alkrarim- Alzarug-	2.4
	Grian- Kikla- Ber Alghanam- Alazizia- Alrabta- Alasaba- Alarban- Abu Zian	2.5
	Zwara- Abu Kamash- Zeltin- Algimil- Alagilat- Sabrata- Surman- Alasa	3.1
	Ben Walid- Wadi Sofaljen- Shamikh- Almardom	4
	Alhisha- Bowirat Alhasum- Algdahia	4.2
	Mizda- Nisma- Fasno	4.3
	Jado- Yefren- Alzentan- Algalaa- Shakshok- Alriaina- Alrhibat- Gaser Alhaj	4.4
	Abu Njim	6.2
	Nalut- Kabaw- Tiji- Algazaia- Wazin- Tamzin- Alhawamda- Aljosh	6.4
	Algriat	7.5
	Senawn- Alshowirf	8.2
	Daraj	9.4
	Ghadamis	10.7
Middle zone	Igdabia- Alzewetina- Sultan	4.5
	Alagila- Albriga- Beshir	5.4
	Sirte- Abu Hadi	5.7
	Ben Jawad- Alnoflia- Alsedra- Ras Lanowf-	6.7
	Mrada- Alragoba	8.9
	Alzahra	9.1
	Wadan- Sokna- Houn	9.3
	Zala	10.1
	Awjala- Amal oil field- Aljoufra- Alnafora oil field- Jalo	10.4
	Zeltin oil field- Alwaha oil field	10.5
	Water field Abar Alsrir	13.4
	Alfagha	13.8
	Wadi Abu Shibirm	15.0
	Tazirbo	15.7
	Zigen	16.1
	Alkofra- Aljof- Altolab- Alhawary	18.1
	Rebiana	19.8
	Alsara	22.1
	Alawainat	22.5
Eastern zone	Benghazi- Alabiar- Darbana- Alkowifia- Algwarsha- Gamenis- Slog	2.9
	Derna- Sosa- Alfadia- Martoba- Albida- Karsa- Almkhili- Algoba- Aslanta- Shahat	3.7
	Zawiat Almaws	3.8
	Almarj- Taknes- Jardas Alahrar- Alagoria- Aldarsia- Gaser Libya- Marwa- Albiada	3.9
	Tobruk- Algara- Algrdaba- Abd Elnaser	5.4
	212 Km from Igdabia desert	6.1
	Amsaid- Ber Alashhab- Gaser Aljadi- Albordi	6.7
	Aljagbob	10.4
Southern zone	Bit Brak	13.9
	Sabha- Tamanhant	15.0
	Idry- Brfn- Winzrik-	15.6
	Um Alaraneb- Zawila- Tragn- Alhamra- Ghadwa- Alawinat Wnin	16.5
	Awbary- Jirma- Alghariga-	17.4
	Tamsa	17.8
	Tasawa- Murzok- Athar Ukba	18.0
	Algatron	18.7
	Alwig	19.9
	Alawinat- Tahala	20.1
	Waw Alkaber	20.3
	Waw Alnamos	21.8
	Gat- Albarkat	21.9